Question :
What are the default measurement locations used in the VM5000 and VM6000 options HD and SD?
Answer :
The following charts shows the default lines for the measurements with the version 2 or version 3 software.
| HD Formats | ||||||
| 1080i | 1080P | 720p | ||||
| Measurement | RGB | YPbPr | RGB | YPbPr | RGB | YPbPr |
| Channel Delay | 109 | 197 | 209 | 385 | 171 | 267 |
| Color Bars | 37 | 37 | 65 | 65 | 59 | 59 |
| Frequency Response | 85 | 229 | 161 | 449 | 139 | 299 |
| Multiburst | 133 | 261 | 257 | 513 | 203 | 347 |
| Noise | 485 | 485 | 961 | 961 | 651 | 651 |
| Non Linearity | 389 | 389 | 769 | 769 | 539 | 539 |
| Short Time Distortion | 61 | 165 | 113 | 321 | 107 | 235 |
| Sync | 485 | 485 | 961 | 961 | 651 | 651 |
| SD Formats | ||||||||
| 480i | 576i | 576p | 480p | |||||
| Measurement | RGB | YPbPr | RGB | YPbPr | RGB | YPbPr | RGB | YPbPr |
| Channel Delay | 57 | 93 | 80 | 128 | 164 | 260 | 116 | 188 |
| Color Bars | 29 | 29 | 32 | 32 | 68 | 68 | 60 | 60 |
| Frequency Response | 49 | 109 | 64 | 144 | 132 | 292 | 100 | 220 |
| Multiburst | 65 | 125 | 96 | 160 | 210 | 324 | 132 | 252 |
| Noise | 229 | 229 | 272 | 272 | 548 | 548 | 460 | 460 |
| Non Linearity | 189 | 189 | 224 | 224 | 452 | 452 | 380 | 380 |
| Short Time Distortion | 41 | 77 | 48 | 112 | 100 | 228 | 84 | 156 |
| Sync | 229 | 229 | 272 | 272 | 548 | 548 | 460 | 460 |
This FAQ Applies to:
No product series
Product:
FAQ ID 58606
View all FAQs »