TDS2000C Digital Storage Oscilloscope

TDS2000C Digital Storage Oscilloscope

Thumbnail
The TDS2000C Oscilloscope Series provides you with affordable performance in a compact design. Featuring Tektronix proprietary technology, the digital real-time sampling architecture means you can accurately see small signal details. Every model is packed with standard features, including USB connectivity, 16 automated measurements, limit testing, built-in help menu and a Lifetime Warranty**. Get more done in less time with the TDS2000C Oscilloscope Series.
See all oscilloscopes »

Every engineer has a scope story
Share your #TekScopeStory and be
part of the #TekOneMillion.

Bandwidth

Up to 200 MHz

Analog Channels

2 or 4

Record Length

2.5k points

Sample Rate

Up to 2 GS/s

 

Features

Benefits

Digital real-time sampling Accurately capture signals with at least 10X over-sampling on all channels, all the time with Tektronix proprietary sampling technology.
Built-in analysis tools Simplify analysis of your device with 16 automated measurements, FFT analysis, waveform math and cursors.
Waveform limit testing Eliminate mistakes with the pass/fail summary table that clearly shows how many waveforms are within the limits of your specified template.
Help menu Get the help you need – when and where you need it – with the built-in, context-sensitive help system.
Dedicated front-panel controls Spend less time learning and more time on your task with easy-to-use front-panel Affordable performance, compact design. 10x oversampling, USB connectivity, 16 automated measurements.
Front-panel USB host port Quickly store and transfer your waveforms and settings.
USB PC connectivity Easily connect to a personal computer with the rear-panel USB device port. Use NI LabVIEW SignalExpress™ software to control your scope, log data, and to simply transfer and document your results.
Bright color display See your waveform and measurement results at a distance, at an angle or under dim lighting with the bright, active color display.
Lifetime Warranty** Reduce your cost of ownership with the standard, Lifetime Warranty.

** Limitations apply. View terms and conditions.


Models

Model Analog Bandwidth Sample Rate Record Length Analog Channels List Price
TDS2012C 100 MHz 2 GS/s 2.5k points 2
-
Configure & Quote
TDS2022C 200 MHz 2 GS/s 2.5k points 2
-
Configure & Quote
TDS2014C 100 MHz 2 GS/s 2.5k points 4
-
Configure & Quote
TDS2024C 200 MHz 2 GS/s 2.5k points 4
-
Configure & Quote
Model TDS2012C
Analog BandwidthSample RateRecord Length
100 MHz2 GS/s2.5k points
Analog Channels
2
Model TDS2022C
Analog BandwidthSample RateRecord Length
200 MHz2 GS/s2.5k points
Analog Channels
2
Model TDS2014C
Analog BandwidthSample RateRecord Length
100 MHz2 GS/s2.5k points
Analog Channels
4
Model TDS2024C
Analog BandwidthSample RateRecord Length
200 MHz2 GS/s2.5k points
Analog Channels
4
Model Analog Bandwidth Sample Rate Record Length Analog Channels List Price
TDS2012C 100 MHz 2 GS/s 2.5k points 2
-
Configure & Quote
TDS2022C 200 MHz 2 GS/s 2.5k points 2
-
Configure & Quote
TDS2014C 100 MHz 2 GS/s 2.5k points 4
-
Configure & Quote
TDS2024C 200 MHz 2 GS/s 2.5k points 4
-
Configure & Quote
Model TDS2012C
Analog BandwidthSample RateRecord Length
100 MHz2 GS/s2.5k points
Analog Channels
2
Model TDS2022C
Analog BandwidthSample RateRecord Length
200 MHz2 GS/s2.5k points
Analog Channels
2
Model TDS2014C
Analog BandwidthSample RateRecord Length
100 MHz2 GS/s2.5k points
Analog Channels
4
Model TDS2024C
Analog BandwidthSample RateRecord Length
200 MHz2 GS/s2.5k points
Analog Channels
4
Current Probe
Datasheet LinkProbeDescriptionConfigure and Quote
A621

Current Probe: 50 kHz, 10 mA to 2000 A, AC, BNC

Configure & Quote
A622

Current Probe: 100 kHz, 10 mA to 100 A, AC/DC, BNC

Configure & Quote
P6022 Current Probe: 120 MHz, 1 mA to 3 A, AC, BNC Configure & Quote
Passive Probe
Datasheet LinkProbeDescriptionConfigure and Quote
P2220 Passive Probe: 200 MHz, 1X/10X, BNC Configure & Quote
TPP0101 Passive Probe: 100 MHz, 10X, BNC Configure & Quote
TPP0201 Passive Probe: 200 MHz, 10X, BNC Configure & Quote
High Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
P5200A High Voltage Probe: 50 MHz, 50X/500X, 1.3 kV, Differential, BNC Configure & Quote
Data SheetAccessoryDescription
1103 TekProbe Power Supply
AC2100 Soft Carrying Case
HCTEK4321 Hard Carrying Case
LabVIEW SignalExpress Step for TDS1000B, B-SC, C, C-EDU, TDS2000B, C V2.0

Part number: 066130301
Application
FIRMWARE UPDATE FOR TDS1000C-SC and TDS2000C

Part number: 066134800
Firmware
TDS2000C and TDS1000C-EDU Series
This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on the TDS2000C Series Digital Storage Oscilloscopes.
Part number: 077044601
Service
TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B Series
This document describes commands that can be used to remotely control the product.
Part number: 077044401
Programmer
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
This document helps customers with data security concerns to sanitize or remove memory devices from the TDS1000B, TDS2000B, TDS1000C-EDU, TDS2000C, and TPS2000B Series Digital Storage Oscilloscopes
Part number: 077044500
Declassification
TDS2000C and TDS1000C-EDU Series
This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on TDS2000C and TDS1000C-EDU Series Digital Storage Oscilloscopes.
Part number: 077044602
Service
TDS2000C Series
This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on the TDS2000C Series Digital Storage Oscilloscopes.
Part number: 077044600
Service
TDS2000C and TDS1000C-EDU Series
This TDS2000C series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features, functions, and applications.
Part number: 077082600
Primary User
RM2000B
This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
Part number: 071198401
Field Install Instructions
TDS2000C and TDS1000C-EDU Series
This TDS2000C series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features, functions, and applications.
Part number: 071272203
Primary User
TBS1000B, TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B Series
This document describes commands that can be used to remotely control the product.
Part number: 077044403
Programmer
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4

Part number: 066093809
Driver
Tektronix Toolbars for Microsoft Office, V4.0.4
Tektronix Toolbars for Microsoft Office, V4.0.4
Part number: 066133202
Utility
FIRMWARE UPDATE FOR TDS2000C -- Russian only

Part number: 066114103
Firmware
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for your…
Literature number: 60W_14232_10
Product Selector Guide 11 Sep 2019
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix.
Literature number: 46W-31080-5
Selection Guide 29 Aug 2019
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to: Describe how oscilloscopes work, Describe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopes, describe electrical waveform types, understand basic…
Literature number: 03Z-8605-7
Primer 27 Aug 2019
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various…
Part number: 066093812
Driver
10 Factors in Choosing a Basic Oscilloscope.
Basic oscilloscopes are used as windows into signals for…
Literature number: 3GW_60848_1
Brochure 13 Aug 2019
Key differences between the TBS2000, MSO/DPO2000B, TBS1000B, and TDS2000C
Below is a condensed table of key specifications of this range of oscilloscopes. More information can be found on the data sheets or in the manuals of each of the oscilloscope product lines. Note that there are feature options available to each product…
FAQ ID: 72201 09 Aug 2019
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various…
Part number: 066093811
Driver
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit and…
FAQ ID: 474266 30 Jul 2019
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital…
FAQ ID: 60306 29 Jul 2019
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the right…
FAQ ID: 63686 29 Jul 2019
Difference between Position and Offset on an oscilloscope
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker…
FAQ ID: 247211 29 Jul 2019
Digital Storage Oscilloscopes
TDS2000C Series Datasheet The TDS2000C Digital Storage Oscilloscope Series provides you with affordable performance in a compact design. Packed with standard features - including USB connectivity, 16 automated measurements, limit testing, data logging, and context-sensitive help…
Literature number: 3GW-25645-8
Datasheet
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the…
FAQ ID: 64796 16 Jul 2019
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the…
FAQ ID: 64791 16 Jul 2019
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start Application…
FAQ ID: 69181 25 Jun 2019
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA. Agilent…
FAQ ID: 69176 25 Jun 2019
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the correct…
FAQ ID: 69186 25 Jun 2019
LabVIEW SignalExpress Step for TDS1000B, B-SC, C, C-EDU, TDS2000B, C
This Step provides the capability to connect, control and log data from the TDS1000B, B-SC, C and C-EDU; TDS2000B and C; and TPS2000B series instruments from the Signal Express Environment.
Part number: 066130301
Application
FIRMWARE UPDATE FOR TDS1000C-SC and TDS2000C
V24.26 is a firmware update for TDS1000C-SC AND TDS2000C series oscilloscopes.
Part number: 066134800
Firmware
TBS1000 and TDS2000C Series Reliability
TBS/TDS Series......performance, reliability at an affordable price.
Literature number: 3GW-29364-0
Competitive 11 Nov 2018
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top