Download Manuals, Datasheets, Software and more:



Tektronix offers MIPI designers – such as those working on autonomous driving systems, in-vehicle infotainment or other mobile devices – a portfolio of MIPI PHY transmitter, receiver and protocol test solutions for M-PHY, D-PHY and C-PHY. These solutions are keeping pace with the rapidly changing MIPI standards landscape, giving designers the future-proof test solutions they need to efficiently bring new products to market.

NEW! Industry’s first receiver test solution with 100 percent coverage of the MIPI Alliance’s recently released D-PHY v.2.0 specification along with full support for the C-PHY v1.1 receiver test specification.

Transmitter & Receiver Testing with Tektronix Oscilloscopes, AWGs, BERTs and Software


Understanding and Characterizing Timing Jitter Primer
Timing jitter is the unwelcome companion of all electrical systems that use voltage transitions to represent timing information. Historically, electrical systems have lessened the ill effects of …
The Basics of Serial Data Compliance and Validation Measurements
High-speed serial bus architectures are the new norm in today’s high-performance designs. While parallel bus standards are undergoing some changes, serial buses are established across multiple markets …
Triggering Fundamentals With Pinpoint® Triggering and Event Search & Mark for DPO7000
This document discusses the fundamentals of triggering and how Pinpoint triggering and Search and Mark takes triggering in real-time oscilloscopes to new levels of productivity.
Understanding and Performing MIPI M-PHY Physical and Protocol Layer Testing
Review this application note for background and how to perform MIPI M-PHY testing, including Transmitter configurations and testing challenges, different signal generation requirements for Receiver …
Decoding and Searching MIPI I3C Bus Activity with an Oscilloscope
The MIPI I3C standard defines a two-wire interface with a bidirectional data bus for connecting sensors to an application processor. This application note gives a brief orientation on the physical …
Automated Compliance Testing of MIPI D-PHY Physical Layer
The MIPI Alliance has defined tests to ensure that MIPI D-PHY transmitter designs conform to MIPI standards.  D-PHY compliance testing is usually performed using an oscilloscope and may be automated …
TekExpress Software and MIPI® Physical Layer and Protocol Layer Testing
Understanding and performing MIPI® D-PHY physical layer, CSI and DSI protocol layer testing with Tektronix TekExpress software and oscilloscopes.
Oscilloscope Probing for MIPI M-PHY TX Measurements
This application note reviews the requirements of the M-PHY standard that relate to oscilloscope probing, discusses tests required in the M-PHY Physical Layer Conformance Test Suite (CTS), and …
Probing Tips for High Performance Design and Measurement
When a high performance system or component needs to be verified, it often requires attaching an oscilloscope probe. For high speed circuits, the effect of attaching a probe often cannot be ignored …
Debugging Serial Buses in Embedded System Designs
Learn the basics of the hardware protocols of the most common serial buses, such as I2C, SPI , USB, RS-232/422/485/UART, CAN, CAN FD, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM.  Find out how to use …
HDMI 20 Webinar
Development & Testing of Next Generation HDMI Interfaces.
Demystify MIPI D-PHY and C-PHY Transmitter and Receiver Physical Layer Test
During this webinar, you'll gain an understanding of MIPI test challenges for both MIPI high-speed physical layers. You'll also get useful tips and technical insights into characterizing and …
PHY Layer Testing for MIPI DPHY MPHY Bus Compliance
How to Design Longer Battery Life in Mobile Computing Devices
This Tektronix Webinar discusses current monitoring over time to assess a semiconductor system's power performance with an emphasis on higher accuracy. In this 35 minute instructional webinar …
MIPI D-PHY Test Method of Implementation (MOI)
Overview:This selection of tests verifies various Electrical Characteristic requirements of D-PHY* products defined Section 8 of the D-PHY* Specification, version 0.9. Group 1 (8.1.x) verifies the …
MIPI® M-PHY Methods of Implementation
This document contains he MIPI® M-PHY* Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test
MIPI C-PHY Receiver Conformance Test MOI Ver 1.2