Increasing serial bus data rates have resulted in requirements for de-embedding measurement circuits, embedding compliance channels, and applying reference equalizers to open closed data eyes for signal integrity evaluations. To assist in the design task on these high speed buses, S-parameter and IBIS-AMI models are often used in the simulation environment to model silicon-specific behavior; while in the measurement environment, S-parameters and reference equalizers have been used. The two different methodologies have led to correlation mismatches between measurement and simulation results. A new technique enabling IBIS-AMI support in the measurement environment permits the acquisition of real-time data from the DUT to be run directly through a modeled receiver, enabling the evaluation of true receiver performance and overcoming correlation issues.
Live Chat with Tek representatives