Download
Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

PSPL5340 Datasheet

PSPL5340 10 dB Pick-off Tee Datasheet

The products on this datasheet are no longer being sold by Tektronix. Contact Technical Support for alternative products View Tektronix Encore for used test equipment Check support and warranty status for these products Find more support information for these products

Read Online:

The PSPL5340 is a broadband, resistive, Pick-Off, Power Divider Tee. The pick-off port 3 output is a small replica of the signal passing through the tee. The PSPL5340 is an impedance-matched tee consisting of three precision, 1% tolerance resistors. The PSPL5340 input/output impedance seen either on port 1 or port 2 is precisely 50 Ω.

Key performance specifications
  • 10 dB
  • 50 ps, 8 GHz
  • Z-matched

Typical performance

PSPL5340-Datasheet-550991-9-N

Frequency Domain Responses from 40 MHz to 10 GHz 
1 GHz/div Insertion Loss plots = 1 dB/div, Return Loss plot = 6 dB/div


PSPL5340-Datasheet-550991-10-N


Specifications

Parameter 1 Value
Pick-Off Insertion Loss DC
(port 1 or 2 to port 3)
10 dB
±0.1 dB
Pick-Off Voltage Ratio 3.16 x
Thru Line Insertion Loss
at DC S21 (port 1 to port 2)
3.3 dB
±0.05 dB
Thru Line Rise time 50 ps
Pick-Off Rise time Not specified; see notes for details
Minimum Signal Rise time 80 ps
Thru Line Bandwidth (-3 dB) 8 GHz
Pick-Off Bandwidth (1 dB) 10 GHz
Pick-Off Bandwidth (3 dB) 13 GHz
Temperature Range -55 to +70 °C operating at full power, derate to 0 W at 125 °C
In / Out Impedance at DC
(port 1 or port 2)
50.0 Ω
±0.3 Ω
S11 or S22 Return Loss, DC 50 dB
S11 or S22 Return Loss, AC (See Typical performance)
Thru Line Resistors, Ra 9.38 Ω
Pick-Off Resistor, Rb 78.4 Ω
Maximum Power Input, average 0.6 W
Connectors SMA jacks (f)
Warranty One Year
Mechanical dimensions
PSPL5340-Datasheet-550991-11-N

1 All parameters listed are typical unless max/min guaranteed limits are provided. Using the pick-off tee for input signals with rise times faster than 80 ps is not recommended. This tee can be used with faster rise times, but there will be waveform distortions. With faster rise times, either the thru-line bandwidth is insufficient and/or the pick-off output will no longer be a faithful representation of the input signal. The pick-off output rise time will be too fast and there will be some overshoot and ringing.

Ordering information

Models
PSPL5340
Pick-Off Tee, 10 dB