Live Chat with Tek representatives
PSPL5336 -- 6 dB Power Splitter, 20 GHz, Datasheet
The products on this datasheet are no longer being sold by Tektronix. Contact Technical Support for alternative products View Tektronix Encore for used test equipment Check support and warranty status for these products Find more support information for these products
The PSPL5336 6 dB Power Splitter is a very broadband, resistive tee. It is useful for splitting a signal into two identical signals. The output is attenuated by 6 dB. This is an impedance-matched tee that presents a 50 Ω input impedance when both outputs are terminated in 50 Ω. Power splitter tees are built using two 50 Ω resistors and present a 50 Ω impedance only at the input port. The resistors in this tee have 1% tolerance so it has excellent symmetry and very close impedance match to 50 Ω. It has a rise time of 20 ps and bandwidth from DC to >20 GHz.
Frequency responses from 40 MHz to 20 GHz, linear sweep at 2 GHz/div.
|Rise time||≤20 ps|
|Insertion loss (-3 dB)||DC to 20 GHz|
|Insertion loss 2, DC||6.02 dB ±0.05 dB maximum|
|Insertion loss, AC||6.0 dB ±0.05 dB maximum, for f 21 plots|
|Insertion loss, Asymmetry||0.09 dB, maximum, DC
|Input impedance, DC 2||50 Ω, ±3 Ω naximum|
|S11 Return loss||See S11 plots for typical vs. frequency|
|Maximum input power, average||1 W|
|Power temperature curve||Full power up to +70 °C, linerly derated to 0 W at +125 °C|
|Peak power||50 W t|
|Connectors||SMA jacks (f)|
1 All parameters listed are typical unless maximum or minimum guaranteed limits are provided.
2 The DC specifications are based upon resistor tolerances and only when used with 50 Ω source and terminations.
- Power Splitter, 6 dB